T-shirt presses from Fuchs
The T-shirt press belongs to the sublimation presses and is also called a thermal press or heat press. It is used to print logos and lettering or images firmly onto T-shirts and other textiles. Due to the conversion process by pressure and heat, washing of the textiles after finishing with such a press is possible without any problems.
Handling a T-shirt press is uncomplicated, requires little effort and is particularly suitable for finishing thin textiles such as T-shirts and fabric bags. In addition to letters, numbers and self-designed logos, complete images and graphics on the corresponding foil can be transferred to a T-shirt with the help of sublimation presses. Depending on the type of motif and design, different foils such as flock foils, flex foils and sublimation foils are used.
Our T-Shirt Presses
How does a T-shirt press work?
In principle, a T-shirt press works like a large and particularly pressure-intensive iron. The front or back part of the T-shirt to be finished is placed between the two halves of the press like a sandwich. The T-shirt press is then firmly closed by a folding mechanism. In addition to the pressure, the effect of heat is of particular importance. Through the heat and the correspondingly strong pressure, the motifs are permanently bonded to the fabric and no longer come off. Since the time required is comparatively short, you can use a T-shirt press to finish several shirts in a row.
How can I print a T-shirt with a heat press?
A particularly handy and inexpensive T-shirt press as a special form of sublimation press does not require much space and is easy to operate. First, the T-shirt is placed on the base plate in the sublimation press and smoothed out. Then the heating plate with the foil material is pressed firmly onto the fabric using a lever. In addition to plotted flock film and flex film, the T-shirt press can also be used to vapour-deposit sublimated ink or inkjet into the fabric. Therefore, such sublimation presses are always used when T-shirts need to be finished quickly and expressively without much effort.
Good reasons for a heat press from Fuchs
Made in Germany
We manufacture each transfer press by hand in our production facility in Upper Bavaria. Among other things, we use our in-house turning shop to ensure the guaranteed high quality of all our presses. Hand on it.
Clever construction
Thanks to the modular design of Fuchs transfer presses, wear parts can usually be replaced by the operator without any problems. However, if a major repair is required, our specialists will carry it out for you in our workshop in a short time.
Service from the expert
Maintenance, repair or spare part needed? Because we know our machines inside out, our specialists can help quickly – without any complications! So your heat press is quickly and inexpensively ready for use again!
Directly from manufacturer
No detours. No surcharges. Full transparency. We produce our transfer presses completely ourselves. This gives us full control over quality and you also benefit from favorable manufacturer prices.
Satisfaction guarantee
Not only the reliability of our products, but also reliability in the relationship between people is a top priority for us. It is one of the cornerstones of a cooperative partnership with customers, suppliers and employees.