Membrane heat press – Air-Swing 2000 Membran Pro
Advantages
With this membrane heat press, annoying seams, buttons, zippers and other protrusions are a thing of the past.
The membrane air cushion in the work plate compensates for unevenness in the textile.
Due to the special base of the PRO version, textiles, bags, backpacks, etc. can be completely covered.
-
Complete overdrawing possible
-
Clear view due to swiveling
-
Interchangeable removable plates
-
High pressing force
-
Precisely adjustable pressing force
-
Evens out unevenness such as buttons, seams, zippers, etc.
-
less press marks in the textile
-
opens automatically
-
No effort required
Details and functionality of the Air-Swing 2000 Membrane Pro
Membrane function
Membrane presses have a special air cushion in the working plate which works like a lifting cushion. This technology almost perfectly compensates for protrusions such as thick seams, buttons, zippers, polo strips, etc. However, two important points must be kept in mind when working with the membrane function.
- Transfer should not be pressed directly over unevennesses
- Attention should be paid to heat resistance of the unevennesses
Because the membrane function can be deactivated and the machine can also be equipped with standard worktops due to our quick-change system, you have a high degree of flexibility.
Modular construction
Thanks to a quick-change device, the worktops can be easily exchanged in a few seconds without the need for tools. Because the worktops are free-standing, the textiles can be conveniently pulled on so that only the cut-out to be printed lies on top. This results in the following advantages:
Transfer prints on the reverse side are protected
no printing creases
prints do not bleed through
In addition to the standard worktop sizes, we also produce custom sizes!
Electrics and display
The temperature and time can be easily and quickly set and read on our clearly arranged display.
Heating plate
A fast heating up as well as an even and constant temperature is guaranteed thanks to the newest Mikanit heating foil technology. Our heating plates, which we manufacture ourselves, are delivered as standard with a Teflon cover, which is fixed with a clamping device and can be replaced by the customer himself at any time.
In addition to the heating plates standard sizes, we also produce custom sizes!
With membrane function
To trigger the pressing process on the Air-Swing 2000 membrane PRO pneumatic membrane press, two pushbuttons must be pressed simultaneously for safety reasons until the heating plate rests on the work plate or membrane plate (2-hand safety circuit). During the pressing process, the membrane pad fills with air and thus presses evenly against the heating plate. After the set time has elapsed, the air first escapes from the membrane cushion and then the transfer press opens again automatically. Swiveling is done manually. The contact pressure can be precisely adjusted via a pressure regulator.
Without membrane function
The operating sequence is the same as for pressing with membrane function
Consumables
The Teflon protection for the heater ensures, as the name suggests, that the heating plate is protected against dirt such as adhesive residues or paint. In addition, the Teflon can be cleaned very easily or, in the worst case, simply replaced with a new one.
A Nomex cover protects the worktop or the silicone rubber. The cover also ensures that the textile slides better over the worktop when it is pulled on. It can be washed or replaced as well.
The silicone rubber on the worktop contributes significantly to the printing result. Due to the now very diverse printing possibilities, you get different results with hard or softer silicone rubber pads. Because we do not glue our pads to the worktops, the silicone rubber can also be exchanged for another one at any time. By default, a medium-hard is delivered. However, you can also order a soft and a hard silicone rubber from us.
Technical data
Similar products
Good reasons for a heat press from Fuchs
Made in Germany
We manufacture each transfer press by hand in our production facility in Upper Bavaria. Among other things, we use our in-house turning shop to ensure the guaranteed high quality of all our presses. Hand on it.
Clever construction
Thanks to the modular design of Fuchs transfer presses, wear parts can usually be replaced by the operator without any problems. However, if a major repair is required, our specialists will carry it out for you in our workshop in a short time.
Service from the expert
Maintenance, repair or spare part needed? Because we know our machines inside out, our specialists can help quickly – without any complications! So your heat press is quickly and inexpensively ready for use again!
Directly from manufacturer
No detours. No surcharges. Full transparency. We produce our transfer presses completely ourselves. This gives us full control over quality and you also benefit from favorable manufacturer prices.
Satisfaction guarantee
Not only the reliability of our products, but also reliability in the relationship between people is a top priority for us. It is one of the cornerstones of a cooperative partnership with customers, suppliers and employees.
Request the Air-Swing 2000 Membran Pro now!
I will be happy to answer your questions!
- quick feedback
- individual offer
- personal consultation