Pneumatic heat press – Air-Swing 2000 Pro


The Air-Swing 2000 PRO pneumatic heat press is particularly suitable for high volumes due to its two worktops. The next transfer can already be prepared during a press process.

The special underframe of the PRO version allows textiles, bags, backpacks and much more to be completely covered.

  • Complete covering possible
  • Exchangeable exchangeable plates
  • Free view due to swiveling
  • High press force
  • Precisely adjustable press force
  • Opens automatically
  • No effort required
  • Work faster

Details and functionality of the Air-Swing 2000 Pro

Modular design

Thanks to a quick-change device, the worktops can be exchanged in just a few seconds without any tools at all. Because the worktops are free-standing, the textiles can be easily pulled on, so that only the cut-out to be printed lies on it. This results in the following advantages:

  • Transfer prints on the reverse side are protected
  • no pressure wrinkles
  • Prints don’t go through

In addition to the standard worktop sizes, we also manufacture custom sizes!

Electrics and display

The temperature and time can be set and read easily, quickly and uncomplicatedly on our clear display

Heating plate

Fast heating as well as an even and constant temperature is guaranteed thanks to the latest Mikanit heating foil technology. Our heating plates, which we manufacture ourselves, are supplied with a Teflon cover as standard, which is fastened with a clamping device and can be replaced by the customer himself at any time.

In addition to the standard heating plates, we also manufacture custom sizes!

How it works

In order to start the pressing process on the Air-Swing 2000 PRO pneumatic transfer press, for safety reasons two pressure batches must be pressed simultaneously until the heating plate rests on the working plate (2-hand safety circuit). After the set time has elapsed, the transfer press opens automatically. The machine also has a manual pre- or post-press function. The swivel is done manually. The contact pressure can be precisely adjusted via a pressure regulator.


The Teflon protection for the heating ensures, as the name suggests, that the heating plate is protected against dirt such as glue residues or paint. In addition, the Teflon is very easy to clean or, in the worst case, can simply be replaced by a new one.

A Nomex nettle cover protects the worktop or silicone rubber. The cover also ensures that the textiles slide better over the worktop when pulled on. It can be washed or also replaced.

The silicone rubber on the worktop contributes significantly to the printing result. Due to the meanwhile very varied printing possibilities you get different results with hard or softer silicone rubber layers. As we do not glue our pads to the worktops, the silicone rubber can also be exchanged for another at any time. A medium-hard one is delivered as standard. However, you can also order a soft and a hard silicone rubber from us.

Figures that speak for themselves

Technical data

suitable for all transfer applications
Swivel press
pneumatic (compressor required!)
Heating plate formats in cm
45×35 / 50×40
Temperature setting
digital 0-230C°
Time setting
digital 0-999sek.
Contact pressure
approx. 0.8 kg/cm2 depending on panel size
Pressure setting
stepless 0-6 bar
approx. 125 kg
Dimensions (WxDxH) in cm
Power / Connection
230V / 10A / 2200W
Scope of delivery
Teflon cover, Nomex nettle protective cover, silicone rubber
Quick-change system for different worktops, Mikanit surface heating, power mode, different languages, manual prepress and postpress function,
Removable discs in cm
15×15 / 20×20 / 30×15 / short sleeves 12×20 / long sleeves 35×10 / 30×20 / 30×35 / 35×45 / 50×40 /35×45 Polo / 35×45 Jackets / (Other sizes on request)
Plenty of choice

Similar products

The PRO version with the unique undercarriage for even more comfort when pulling over
This heat press can professionally print t-shirts, sweatshirts, jackets, sleeves, bags, lanyards and more.
This heat press can professionally print t-shirts, sweatshirts, jackets, sleeves, bags, lanyards and more.
Convincing and powerful

Good reasons for a heat press from Fuchs

Made in Germany

We manufacture each transfer press by hand in our production facility in Upper Bavaria. Among other things, we use our in-house turning shop to ensure the guaranteed high quality of all our presses. Hand on it.

Clever construction

Thanks to the modular design of Fuchs transfer presses, wear parts can usually be replaced by the operator without any problems. However, if a major repair is required, our specialists will carry it out for you in our workshop in a short time.

Service from the expert

Maintenance, repair or spare part needed? Because we know our machines inside out, our specialists can help quickly – without any complications! So your heat press is quickly and inexpensively ready for use again!

Directly from manufacturer

No detours. No surcharges. Full transparency. We produce our transfer presses completely ourselves. This gives us full control over quality and you also benefit from favorable manufacturer prices.

Satisfaction guarantee

Not only the reliability of our products, but also reliability in the relationship between people is a top priority for us. It is one of the cornerstones of a cooperative partnership with customers, suppliers and employees.


Request the Air-Swing 2000 Pro now!



    E-mail address*

    Phone number


    Message / special wishes

    * Mandatory field | By submitting the contact form, I agree to the Data protection regulations. I am aware that I can revoke my consent at any time by sending an email to and thus arrange for the deletion of the data. The data provided by me will be used exclusively in the context of my contact.

    I will be happy to answer your questions!

    • quick feedback
    • individual offer
    • personal consultation

    Phone. 08171 / 81485