Manual heat press – Combination Press
Advantages
-
Interchangeable worktops
-
Exchangeable heating plates
-
Low space requirement
-
Height adjustment of the worktops
Details and functionality of the Combination Press
This device can optionally be ordered with the following basic equipment.
- Combi press with cap module
- Combi press with plate format 15x15cm
- Combi-press with plate format 20x20cm
- Combi-press with plate size 30x15cm
- Combi-press with plate size 30x20cm
depending on the basic equipment, other heating plates or worktops can be retrofitted at any time.
Modular design
Thanks to a quick-change device, the worktops can be exchanged in just a few seconds without any tools at all. Because the worktops are free-standing, the textiles can be easily pulled on, so that only the cut-out to be printed lies on it. This results in the following advantages:
- Transfer prints on the reverse side are protected
- no pressure wrinkles
- Prints don’t go through
In addition to the standard worktop sizes, we also manufacture custom sizes!
The heating plates of this device can also be exchanged using the quick-change device
Electrics and display
The temperature and time can be set and read easily, quickly and uncomplicatedly on our clear display
Heating plate
Fast heating as well as an even and constant temperature is guaranteed thanks to the latest Mikanit heating foil technology. Our heating plates, which we manufacture ourselves, are supplied with a Teflon cover as standard, which is fastened with a clamping device and can be replaced by the customer himself at any time.
In addition to the standard heating plates, we also manufacture custom sizes!
How it works
When the transfer press is closed, the mechanism automatically engages by means of a toggle lever principle. The pressure can be adjusted via an easily accessible knurled screw. An acoustic signal sounds when the set time has elapsed. The time of unlocking is thus indicated unmistakably. By briefly lifting the lever arm, the machine opens again gently by itself.
Consumables
The Teflon protection for the heating ensures, as the name suggests, that the heating plate is protected against dirt such as glue residues or paint. In addition, the Teflon is very easy to clean or, in the worst case, can simply be replaced by a new one.
A Nomex nettle cover protects the worktop or silicone rubber. The cover also ensures that the textiles slide better over the worktop when pulled on. It can be washed or also replaced.
The silicone rubber on the worktop contributes significantly to the printing result. Due to the meanwhile very varied printing possibilities you get different results with hard or softer silicone rubber layers. As we do not glue our pads to the worktops, the silicone rubber can also be exchanged for another at any time. A medium-hard one is delivered as standard. However, you can also order a soft and a hard silicone rubber from us.
Technical data
Similar products
Good reasons for a heat press from Fuchs
Made in Germany
We manufacture each transfer press by hand in our production facility in Upper Bavaria. Among other things, we use our in-house turning shop to ensure the guaranteed high quality of all our presses. Hand on it.
Clever construction
Thanks to the modular design of Fuchs transfer presses, wear parts can usually be replaced by the operator without any problems. However, if a major repair is required, our specialists will carry it out for you in our workshop in a short time.
Service from the expert
Maintenance, repair or spare part needed? Because we know our machines inside out, our specialists can help quickly – without any complications! So your heat press is quickly and inexpensively ready for use again!
Directly from manufacturer
No detours. No surcharges. Full transparency. We produce our transfer presses completely ourselves. This gives us full control over quality and you also benefit from favorable manufacturer prices.
Satisfaction guarantee
Not only the reliability of our products, but also reliability in the relationship between people is a top priority for us. It is one of the cornerstones of a cooperative partnership with customers, suppliers and employees.
Request the Combination Press now!
I will be happy to answer your questions!
- quick feedback
- individual offer
- personal consultation
Phone. 08171 / 81485
E-mail. info@fuchs-transferpressen.de
