Pneumatic heat press – Air-Swing 1000 Pro
With this model you can professionally print T-shirts, sweatshirts, jackets, sleeves, bags, lanyards and much more.
The special base of the PRO version allows textiles, bags, backpacks and more to be completely covered.
Complete overdrawing possible
Free view due to swiveling
High press force
Precisely adjustable press force
No effort required
Details and functionality of the Air-Swing 1000 Pro
Thanks to a quick-change device, the worktops can be exchanged in just a few seconds without any tools at all. Because the worktops are free-standing, the textiles can be easily pulled on, so that only the cut-out to be printed lies on it. This results in the following advantages:
- Transfer prints on the reverse side are protected
- no pressure wrinkles
- Prints don’t go through
In addition to the standard worktop sizes, we also manufacture custom sizes!
Electrics and display
The temperature and time can be set and read easily, quickly and uncomplicatedly on our clear display
Fast heating as well as an even and constant temperature is guaranteed thanks to the latest Mikanit heating foil technology. Our heating plates, which we manufacture ourselves, are supplied with a Teflon cover as standard, which is fastened with a clamping device and can be replaced by the customer himself at any time.
In addition to the standard heating plates, we also manufacture custom sizes!
How it works
In order to start the pressing process on the Air-Swing 1000 Pro pneumatic transfer press, for safety reasons two pressure batches must be pressed simultaneously until the heating plate rests on the working plate (2-hand safety circuit). After the set time has elapsed, the transfer press opens automatically. The machine also has a manual pre- or post-press function. The swivel is done manually. The contact pressure can be precisely adjusted via a pressure regulator.
The Teflon protection for the heating ensures, as the name suggests, that the heating plate is protected against dirt such as glue residues or paint. In addition, the Teflon is very easy to clean or, in the worst case, can simply be replaced by a new one.
A Nomex nettle cover protects the worktop or silicone rubber. The cover also ensures that the textiles slide better over the worktop when pulled on. It can be washed or also replaced.
The silicone rubber on the worktop contributes significantly to the printing result. Due to the meanwhile very varied printing possibilities you get different results with hard or softer silicone rubber layers. As we do not glue our pads to the worktops, the silicone rubber can also be exchanged for another at any time. A medium-hard one is delivered as standard. However, you can also order a soft and a hard silicone rubber from us.
Good reasons for a heat press from Fuchs
Made in Germany
We manufacture each transfer press by hand in our production facility in Upper Bavaria. Among other things, we use our in-house turning shop to ensure the guaranteed high quality of all our presses. Hand on it.
Thanks to the modular design of Fuchs transfer presses, wear parts can usually be replaced by the operator without any problems. However, if a major repair is required, our specialists will carry it out for you in our workshop in a short time.
Service from the expert
Maintenance, repair or spare part needed? Because we know our machines inside out, our specialists can help quickly – without any complications! So your heat press is quickly and inexpensively ready for use again!
Directly from manufacturer
No detours. No surcharges. Full transparency. We produce our transfer presses completely ourselves. This gives us full control over quality and you also benefit from favorable manufacturer prices.
Not only the reliability of our products, but also reliability in the relationship between people is a top priority for us. It is one of the cornerstones of a cooperative partnership with customers, suppliers and employees.