
Membrane Press Air-Swing 3000 Membran Pro
Advantages of the Air-Swing 3000 Membran Pro press
With this fully automatic membrane transfer press, annoying seams, buttons, zippers and other protrusions are a thing of the past.
The membrane air cushion in the work plate compensates for unevenness in the textile.
Textiles, bags, rucksacks and much more can be completely covered thanks to the special base frame of the PRO version.
-
Complete overdrawing possible
-
Interchangeable worktops
-
Clear view thanks to swivel capability
-
High pressing force
-
Precisely adjustable pressing force
-
swivels automatically
-
opens automatically
-
No effort required
-
Faster work
-
Free choice between automatic and manual mode
-
Manual pre- and post-press function
-
Free choice between 1 table and 2 table function

Details and function of the Air-Swing 3000 Membran Pro
Membrane function
Membrane presses have a special air cushion in the working plate that works like a lifting cushion. This technology allows protrusions such as thick seams, buttons, zippers, polo strips, etc. to be almost perfectly evened out. However, there are two important points to bear in mind when working with the membrane function.
- Transfer should not be pressed directly over uneven areas
- Ensure that the uneven areas are heat-resistant
As the membrane function can be deactivated and the machine can also be equipped with standard worktops thanks to our quick-change system, you have a high degree of flexibility.
Modular design
Thanks to a quick-change device, the worktops can be exchanged very easily without tools in just a few seconds. The fact that the worktops are free-standing means that the textiles can be pulled on easily so that only the section to be printed is in contact. This results in the following advantages:
- Transfer prints on the reverse side are protected
- No print creases
- Prints do not show through
In addition to the standard worktop sizes, we also produce custom sizes!
Electrics and display
The temperature and time can be set and read easily, quickly and simply on our clear display.
Heating plate
Rapid heating and an even and constant temperature are guaranteed thanks to the latest Mikanit heating foil technology. Our heating plates, which we manufacture ourselves, are supplied with a Teflon cover as standard, which is attached with a clamping device and can be replaced by the customer at any time.
In addition to the standard heating plates, we also manufacture custom sizes!

Functionality with membrane function
To start the pressing process on the fully automatic Air-Swing 3000 Membran PRO membrane transfer press, simply press either a foot switch or a hand switch on the machine. The transfer press swings and presses all by itself. During the pressing process, the membrane cushion fills with air and presses evenly against the heating plate. After the set time has elapsed, the air first escapes from the membrane cushion and then the heat press opens again automatically. The next pressing cycle can now be started. You can also choose between automatic and manual operation. Manual operation simply means that the press can be swiveled by hand. The pressing process then starts automatically as soon as the swivel arm has reached the end position above the working plate or membrane plate. It is also possible to define whether only one plate is pressed or both. The machine also has a manual pre- and post-pressing function. The contact pressure can be set precisely using a pressure regulator.
Operation without membrane function
The membrane function can also be deactivated and thus equipped with a conventional working plate. The work process is exactly the same as described above
Consumables
As the name suggests, the Teflon protection for the heater ensures that the heating plate is protected against dirt such as adhesive residue or paint. In addition, the Teflon can be cleaned very easily or, in the worst case, simply replaced with a new one.
A Nomex nettle cover protects the worktop or the silicone rubber. The cover also ensures that the textiles slide better over the worktop when pulled on. It can be washed or replaced.
The silicone rubber on the worktop contributes significantly to the printing result. Thanks to the wide range of printing options now available, you can achieve different results with hard or soft silicone rubber overlays. As we do not glue our overlays to the worktops, the silicone rubber can also be replaced with a different one at any time. A medium-hard one is supplied as standard. However, you can also order a soft and a hard silicone rubber from us.
Technical data
Similar products




Matching accessories









Good reasons for a heat press from Fuchs
Made in Germany
We manufacture each transfer press by hand in our production facility in Upper Bavaria. Among other things, we use our in-house turning shop to ensure the guaranteed high quality of all our presses. Hand on it.
Clever construction
Thanks to the modular design of Fuchs transfer presses, wear parts can usually be replaced by the operator without any problems. However, if a major repair is required, our specialists will carry it out for you in our workshop in a short time.
Service from the expert
Maintenance, repair or spare part needed? Because we know our machines inside out, our specialists can help quickly – without any complications! So your heat press is quickly and inexpensively ready for use again!
Directly from manufacturer
No detours. No surcharges. Full transparency. We produce our transfer presses completely ourselves. This gives us full control over quality and you also benefit from favorable manufacturer prices.
Satisfaction guarantee
Not only the reliability of our products, but also reliability in the relationship between people is a top priority for us. It is one of the cornerstones of a cooperative partnership with customers, suppliers and employees.
Request the Air-Swing 3000 Membran Pro now!
I will be happy to answer your questions!
- quick feedback
- individual offer
- personal consultation