
Membrane combination press
Advantages of the membrane combi press
The manual transfer press with membrane function is the ideal machine for patching smaller logos. By adjusting the height of the work plates, it is even possible to use the machine as a cap press or ball press.
Thanks to the membrane function, especially for caps, the inflatable cap table adapts ideally to the different cap curvatures in order to achieve the best possible results compared to other standard cap presses
-
Interchangeable worktops
-
Replaceable heating plates
-
Low space requirement
-
Height adjustment of the worktops
-
Compensates for unevenness such as buttons, seams, zippers, etc.
-
fewer press impressions
-
Less effort required
-
Adapts automatically to any cap shape

Details and function of the membrane combi press
This device can optionally be ordered with the following basic equipment.
- Combination press with cap module
- Combi press with plate format 15x15cm
- Combi press with plate format 20x20cm
- Combi press with plate format 30x15cm
- Combination press with plate format 30x20cm
Depending on the basic equipment, other heating plates or work plates can be retrofitted at any time.
Modular design
Thanks to a quick-change device, the worktops can be exchanged in just a few seconds without any tools. The fact that the worktops are free-standing means that the textiles can be pulled on easily so that only the section to be printed is in contact. This results in the following advantages:
- Transfer prints on the reverse side are protected
- No print creases
- Prints do not show through
In addition to the standard worktop sizes, we also produce custom sizes!
The heating plates on this device can also be exchanged using a quick-change device.
Electrics and display
The temperature and time can be set and read easily, quickly and simply on our clear display.
Heating plate
Rapid heating and an even and constant temperature are guaranteed thanks to the latest Mikanit heating foil technology. Our heating plates, which we manufacture ourselves, are supplied with a Teflon cover as standard, which is attached with a clamping device and can be replaced by the customer at any time.
In addition to the standard heating plates, we also manufacture custom sizes!
Membrane function
Membrane presses have a special air cushion in the working plate, which works like a lifting cushion. This technology compensates for protrusions such as thick seams, buttons, zippers, polo strips, etc. almost perfectly. However, there are two important points to bear in mind when working with the membrane function.
Transfer should not be pressed directly over uneven areas
Ensure that the uneven areas are heat-resistant
As the membrane function can be deactivated and the machine can also be equipped with standard worktops thanks to our quick-change system, you have a high degree of flexibility.

How it works
To start the pressing process with the manual membrane transfer press, all you have to do is close the lever arm of the transfer press manually. No great pressure needs to be exerted, as this is generated by the membrane cushion in the membrane press. This can be set precisely using a pressure regulator. During the pressing process, the membrane cushion fills with air and thus presses evenly against the heating plate. After the set time has elapsed, the air first escapes from the membrane pad and an acoustic signal sounds, indicating that the heat press can be opened again using the lever arm.
Consumables
As the name suggests, the Teflon protection for the heater ensures that the heating plate is protected against dirt such as adhesive residue or ink. In addition, the Teflon can be cleaned very easily or, in the worst case, simply replaced with a new one.
A Nomex nettle cover protects the worktop or the silicone rubber. The cover also ensures that the textiles slide better over the worktop when pulled on. It can be washed or replaced.
The silicone rubber on the worktop contributes significantly to the printing result. Thanks to the wide range of printing options now available, you can achieve different results with hard or soft silicone rubber overlays. The fact that we do not glue our overlays to the worktops means that we can
Technical data
Similar products
Good reasons for a heat press from Fuchs
Made in Germany
We manufacture each transfer press by hand in our production facility in Upper Bavaria. Among other things, we use our in-house turning shop to ensure the guaranteed high quality of all our presses. Hand on it.
Clever construction
Thanks to the modular design of Fuchs transfer presses, wear parts can usually be replaced by the operator without any problems. However, if a major repair is required, our specialists will carry it out for you in our workshop in a short time.
Service from the expert
Maintenance, repair or spare part needed? Because we know our machines inside out, our specialists can help quickly – without any complications! So your heat press is quickly and inexpensively ready for use again!
Directly from manufacturer
No detours. No surcharges. Full transparency. We produce our transfer presses completely ourselves. This gives us full control over quality and you also benefit from favorable manufacturer prices.
Satisfaction guarantee
Not only the reliability of our products, but also reliability in the relationship between people is a top priority for us. It is one of the cornerstones of a cooperative partnership with customers, suppliers and employees.
Request the combi press membrane now!
I will be happy to answer your questions!
- quick feedback
- individual offer
- personal consultation