Manual heat press – Swing 100 Pro

Advantages

With the manual heat press Swing-100 T-shirts, jackets, sleeves, trouser legs, bags and much more can be professionally printed.

  • Interchangeable worktops
  • Free view due to swiveling
  • High press force
  • No heat effect on the user
  • Easier positioning due to clear view

Details and functionality of the Swing 100 Pro

Modular design

Thanks to a quick-change device, the worktops can be exchanged in just a few seconds without any tools at all. Because the worktops are free-standing, the textiles can be easily pulled on, so that only the cut-out to be printed lies on it. This results in the following advantages:

  • Transfer prints on the reverse side are protected
  • no pressure wrinkles
  • Prints don’t go through

In addition to the standard worktop sizes, we also manufacture custom sizes!

Electrics and display

The temperature and time can be set and read easily, quickly and uncomplicatedly on our clear display

Heating plate

Fast heating as well as an even and constant temperature is guaranteed thanks to the latest Mikanit heating foil technology. Our heating plates, which we manufacture ourselves, are supplied with a Teflon cover as standard, which is fastened with a clamping device and can be replaced by the customer himself at any time.

In addition to the standard heating plates, we also manufacture custom sizes!

How it works

When the transfer press is closed, the mechanism automatically engages by means of a toggle lever principle. The pressure can be adjusted via an easily accessible knurled screw. An acoustic signal sounds when the set time has elapsed. The time of unlocking is thus indicated unmistakably. By briefly lifting the lever arm, the machine opens again gently by itself.

 

Consumables

The Teflon protection for the heating ensures, as the name suggests, that the heating plate is protected against dirt such as glue residues or paint. In addition, the Teflon is very easy to clean or, in the worst case, can simply be replaced by a new one.

A Nomex nettle cover protects the worktop or silicone rubber. The cover also ensures that the textiles slide better over the worktop when pulled on. It can be washed or also replaced.

The silicone rubber on the worktop contributes significantly to the printing result. Due to the meanwhile very varied printing possibilities you get different results with hard or softer silicone rubber layers. As we do not glue our pads to the worktops, the silicone rubber can also be exchanged for another at any time. A medium-hard one is delivered as standard. However, you can also order a soft and a hard silicone rubber from us.

 

Figures that speak for themselves

Technical data

Uses
suitable for all transfer applications
Design
Swivel press
Drive
manually
Heating plate formats in cm
45×35 / 50×40
Temperature setting
digital 0-230C°
Time setting
digital 0-999sek.
Contact pressure
approx. 0.6 kg/cm2 depending on panel size
Weight
approx. 65kg
Dimensions (WxDxH) in cm
70x70x70
Power / Connection
230V / 10A / 2200W
Scope of delivery
Teflon cover, Nomex nettle protective cover, silicone rubber
Other
Quick-change system for various worktops, Mikanit surface heating, can be converted to up to 6 heating modules
Removable discs in cm
15×15 / 20×20 / 30×15 / short sleeves 12×20 / long sleeves 35×10 / 30×20 / 30×35 / 35×45 / 50×40 / 35×45 Polo / 35×45 Jackets / (Other sizes on request)
Plenty of choice

Similar products

The space saving standard press
The ideal entry-level press
Ideal for patching smaller motifs
Patch press, cap press and ball press in one
Convincing and powerful

Good reasons for a heat press from Fuchs


Made in Germany

We manufacture each transfer press by hand in our production facility in Upper Bavaria. Among other things, we use our in-house turning shop to ensure the guaranteed high quality of all our presses. Hand on it.

Clever construction

Thanks to the modular design of Fuchs transfer presses, wear parts can usually be replaced by the operator without any problems. However, if a major repair is required, our specialists will carry it out for you in our workshop in a short time.

Service from the expert

Maintenance, repair or spare part needed? Because we know our machines inside out, our specialists can help quickly – without any complications! So your heat press is quickly and inexpensively ready for use again!

Directly from manufacturer

No detours. No surcharges. Full transparency. We produce our transfer presses completely ourselves. This gives us full control over quality and you also benefit from favorable manufacturer prices.

Satisfaction guarantee

Not only the reliability of our products, but also reliability in the relationship between people is a top priority for us. It is one of the cornerstones of a cooperative partnership with customers, suppliers and employees.

Convinced?

Request the Swing 100 Pro now!

    Company*

    Contact*

    E-mail address*

    Phone number

    Heating plate format

    Message / special wishes

    * Mandatory field | By submitting the contact form, I agree to the Data protection regulations. I am aware that I can revoke my consent at any time by sending an email to info@fuchs-transferpressen.de and thus arrange for the deletion of the data. The data provided by me will be used exclusively in the context of my contact.

    I will be happy to answer your questions!

    • quick feedback
    • individual offer
    • personal consultation

    T. 08171 / 81485
    E. info@fuchs-transferpressen.de